A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are designed via control engineering process. For continuously modulated control, a feedback controller is used to automatically control a process or operation. The control system compares the value or status of the process variable (PV) being controlled with the desired value or setpoint (SP), and applies the difference as a control signal to bring the process variable output of the plant to the same value as the setpoint. For sequential and combinational logic, software logic, such as in a programmable logic controller, is used. == Open-loop and closed-loop control == == Feedback control systems == == Logic control == Logic control systems for industrial and commercial machinery were historically implemented by interconnected electrical relays and cam timers using ladder logic. Today, most such systems are constructed with microcontrollers or more specialized programmable logic controllers (PLCs). The notation of ladder logic is still in use as a programming method for PLCs. Logic controllers may respond to switches and sensors and can cause the machinery to start and stop various operations through the use of actuators. Logic controllers are used to sequence mechanical operations in many applications. Examples include elevators, washing machines and other systems with interrelated operations. An automatic sequential control system may trigger a series of mechanical actuators in the correct sequence to perform a task. For example, various electric and pneumatic transducers may fold and glue a cardboard box, fill it with the product and then seal it in an automatic packaging machine. PLC software can be written in many different ways – ladder diagrams, SFC (sequential function charts) or statement lists. == On–off control == On–off control uses a feedback controller that switches abruptly between two states. A simple bi-metallic domestic thermostat can be described as an on-off controller. When the temperature in the room (PV) goes below the user setting (SP), the heater is switched on. Another example is a pressure switch on an air compressor. When the pressure (PV) drops below the setpoint (SP) the compressor is powered. Refrigerators and vacuum pumps contain similar mechanisms. Simple on–off control systems like these can be cheap and effective. == Linear control == == Fuzzy logic == Fuzzy logic is an attempt to apply the easy design of logic controllers to the control of complex continuously varying systems. Basically, a measurement in a fuzzy logic system can be partly true. The rules of the system are written in natural language and translated into fuzzy logic. For example, the design for a furnace would start with: "If the temperature is too high, reduce the fuel to the furnace. If the temperature is too low, increase the fuel to the furnace." Measurements from the real world (such as the temperature of a furnace) are fuzzified and logic is calculated arithmetic, as opposed to Boolean logic, and the outputs are de-fuzzified to control equipment. When a robust fuzzy design is reduced to a single, quick calculation, it begins to resemble a conventional feedback loop solution and it might appear that the fuzzy design was unnecessary. However, the fuzzy logic paradigm may provide scalability for large control systems where conventional methods become unwieldy or costly to derive. Fuzzy electronics is an electronic technology that uses fuzzy logic instead of the two-value logic more commonly used in digital electronics. == Physical implementation == The range of control system implementation is from compact controllers often with dedicated software for a particular machine or device, to distributed control systems for industrial process control for a large physical plant. Logic systems and feedback controllers are usually implemented with programmable logic controllers. The Broadly Reconfigurable and Expandable Automation Device (BREAD) is a recent framework that provides many open-source hardware devices which can be connected to create more complex data acquisition and control systems.
Radioplayer
Radioplayer is a radio technology platform, owned by UK radio broadcasters and operated under licence in some other countries. It operates an internet radio web tuner, a set of mobile phone apps, an in-car adaptor, and a growing range of integrations with other connected devices and platforms. Radioplayer is operated by UK Radioplayer Ltd which is a not-for-profit organisation owned by UK radio broadcasters. Initial shareholders were the BBC, Global Radio, GMG Radio, Absolute Radio and RadioCentre. After consolidation in the radio market, current shareholders are the BBC, Global Radio, Bauer Media Group and RadioCentre. == History == Launched in the UK on 31 March 2011, Radioplayer set out to offer a simple and accessible way to listen to radio via the internet. It contained 157 stations at launch. Initially working internally at the BBC for Tim Davie, then Director of BBC Audio & Music, Michael Hill led the project since March 2009; he was made Managing Director of UK Radioplayer Ltd on 28 July 2010. At launch, Radioplayer was a simple and straightforward Flash-based radio player, linked-to by radio stations on their own website. The player included searching and bookmarking across all of UK radio station content. On 5 October 2012, Radioplayer launched a mobile app on iOS phones with an Android version following shortly afterwards. The apps are unavailable for download outside the United Kingdom. This was followed by a tablet app on 25 September 2013. The apps also support Android Wear, Android Auto, Smart Device Link, Apple Watch and Apple CarPlay. They are also compatible with Chromecast and Airplay. In September 2016, Radioplayer announced it had been chosen by Amazon to integrate with their new voice-controlled 'Echo' device, ahead of its UK launch. In July 2017, Radioplayer integrated with the Sonos and Bose multi-room speaker platforms. UK Radioplayer currently contains around 500 UK stations, from Ofcom-licensed broadcasters. Online-only 'sister-stations' can also be added, but only by broadcasters with Ofcom licences which have been on the platform for over a year. == Radioplayer Car == Radioplayer Car was announced in September 2014 as a hybrid radio receiver that switches between FM, DAB and streaming to find the strongest signal. Speaking in Oslo in June 2015, Michael Hill said that he hoped to launch the product in the UK and Norway during the summer of 2015. In February 2017, Radioplayer Car was launched. It was marketed as the world’s first voice-controlled hybrid radio adaptor for car stereos. A small box, fitted behind the dashboard, links to the auxiliary input on an existing car radio. It connects wirelessly via Bluetooth to the driver’s smartphone by an app. The adaptor enabled drivers to listen to their own smartphone music collections using Bluetooth, take hands-free calls, listen to inbound text messages and receive instant audio travel news, customised by GPS to their location and direction of travel. The hardware was manufactured under licence by car audio interfaces supplier Connects2, and Hyde Park Corner was promoted as the preferred installer of the audio equipment. There were several spin-off benefits of the Radioplayer Car project, including the creation of the hybrid radio metadata API for cars, known as the 'WRAPI' (Worldwide Radioplayer API). == International == Through a separate company called Radioplayer Worldwide, Radioplayer technology is licensed to a number of different territories.
Harold Borko
Harold Borko (1922-2012) was an American psychologist and researcher working primarily in the field of information science. == Biography == Borko was born in 1922 in New York City, New York. After serving in the US Army from 1942 to 1946 he obtained a BA in Psychology from the University of California, Los Angeles in 1948 and both his MA and PhD from the University of Southern California in Psychology in 1952. He returned to the army as a psychologist until 1956 after which he began a career working in and teaching information science. He died in California in 2012. == Information Science Career == After leaving the military Borko began working at the RAND Corporation as a Systems Training Specialist in 1956 and moved to the Systems Development Corporation a year later working in the Language Processing and Retrieval department. Alongside this work he taught Psychology at USC from 1957-65 and then moved into teaching Library Science at UCLA from 1965. In 1967 Borko left his role at the Systems Development Corporation and continued as a full-time professor at UCLA until his retirement in 1993.. From 1961 to 1995 Borko authored and co-authored over 100 articles on new developments in the field as well as the historiography of information science. He served as an editor of the Journal of Educational Data Processing from 1963-1975 and as President of the American Society for Information Science in 1966 == Partial list of works == Borko, H. (1962, May). The construction of an empirically based mathematically derived classification system. In Proceedings of the May 1-3, 1962, spring joint computer conference (pp. 279-289). Borko, H., & Bernick, M. (1963). Automatic document classification. Journal of the ACM (JACM), 10(2), 151-162. Borko, H. (1964). The Storage and Retrieval of Educational Information. Journal of Teacher Education, 15(4), 449-452. Borko, H. (1964). Measuring the reliability of subject classification by men and machines. American Documentation, 15(4), 268-273. Borko, H. (1965). The conceptual foundations of information systems. Borko, H. (1968), Information science: What is it?†. Amer. Doc., 19: 3-5. https://doi.org/10.1002/asi.5090190103 Borko, H. (1970). Experiments in book indexing by computer. Information storage and retrieval, 6(1), 5-16. Borko, H. (1985). An introduction to computer-based library systems (Lucy A. Tedd). Education for Information, 3(1), 61.
Informetrics
Informetrics is the study of quantitative aspects of information, it is an extension and evolution of traditional bibliometrics and scientometrics. Informetrics uses bibliometrics and scientometrics methods to study mainly the problems of literature information management and evaluation of science and technology. Informetrics is an independent discipline that uses quantitative methods from mathematics and statistics to study the process, phenomena, and law of informetrics. Informetrics has gained more attention as it is a common scientific method for academic evaluation, research hotspots in discipline, and trend analysis. Informetrics includes the production, dissemination, and use of all forms of information, regardless of its form or origin. Informetrics encompasses the following fields: Scientometrics, which studies quantitative aspects of science Webometrics, which studies quantitative aspects of the World Wide Web Bibliometrics, which studies quantitative aspects of recorded information Cybermetrics, which is similar to webometrics, but broadens its definition to include electronic resources == Origin and Development == The term informetrics (French: informétrie) was coined by German scholar Otto Nacke in 1979, and came from the German word 'informetrie’. The corresponding English terminology soon appeared in the subsequent literature. In September 1980, Professor Otto Nacke introduced the term 'informetrics' at the first seminar on Informetrics in Frankfurt, Germany. Later, Committee on Informetrics has established through The International Federation for Information and Documentation (FID). In 1987, informetrics started to be officially recognized by the international information community and several foreign information scientists. In 1988, at First International Conference on Bibliometrics and Theoretical Aspects of Information Retrieval Archived 2022-05-23 at the Wayback Machine, Brooks suggested bibliometrics and scientometrics can be included in the field of informetrics. In 1990, Leo Egghe and Ronald Rousseau proposed the formation of the discipline of informetrics: statistical bibliography (1923) to bibliometrics and scientometrics (1969) and then to informetrics (1979). In 1993, the International Society for Scientometrics and Informetrics (ISSI) Archived 2023-11-05 at the Wayback Machine was founded at the International Conference on Bibliometrics, Informetrics and Scientometrics in Berlin, and the first one was held in Belgium and organized by Leo Egghe and Ronald Rousseau. The society was formally incorporated in 1994 in the Netherlands and plays a significant role in the development of informetrics. The ISSI aims to promote the "exchange and communication of professional information in the fields of scientometrics and informetrics, including improve standards, theory and practice, as well as promote research, education and training". In addition, to "engage in relevant public conversation and policy discussions". In the western world, 20th century's Informetrics is mostly based on Lotka's law, named after Alfred J. Lotka, Zipf's law, named after George Kingsley Zipf, Bradford's law named after Samuel C. Bradford and on the work of Derek J. de Solla Price, Gerard Salton, Leo Egghe, Ronald Rousseau, Tibor Braun, Olle Persson, Peter Ingwersen, Manfred Bonitz, and Eugene Garfield. == Difference Between Informetrics, Bibliometrics and Scientometrics == Since the 1960s, three similar terms have emerged in the fields of library science, philology and science of science, they are bibliometrics, scientometrics and informetrics, representing three very similar quantitative sub-disciplines. The three metrics terms can be confusing and often misused. Informetrics and bibliometrics interpenetrate each other but have different aspects in research object, research scope, and measuring unit. Informetrics and scientometrics are very different in their research purpose and research object, as well as the research scope and application. Bibliometrics is categorised under the field of library science, it uses mathematical and statistical methods to describe, evaluate, and predict the current status and trends of science and technology. Also to study the "distribution structure, quantitative relationship, change law and quantitative management of literature information, quantitative relationships, patterns and quantitative management of literature and information". The term was first used by Alan Pritchard in 1969 in his paper Statistical Bibliography or Bibliometrics?. Scientometrics is a branch of science that quantitatively evaluates and predicts the process and management of scientific activities in order to reveal their development patterns and trends. The definition of scientometrics was described by Derek De Solla Price in his book Science to Science as the “quantitative study of science, communication in science, and science policy”. === Links between the three metrics terms === The most prominent connection between the three metrics terms is in their research objects. Since all three disciplines use literature information as their research object, therefore, they have some similarities and overlaps in their research methods and fields. Moreover, they all use mathematical methods as the basic research methods and they all apply the three basic laws, Bradford's law, Lotka's law and Zipf's law. === Distinctions between the three metrics terms === The distinction between the three metrics terms can tell from their research object and research purpose. The research of bibliometrics focuses on the analysis of "scientific output in the form of articles, publications, citations, and others". Scientometrics is to measure the basic characteristics and laws of scientific activities. Where informetrics is to investigate information sources and information distribution process. == Concept and System Structure == === Purpose of Informetrics Research === The main purpose of informetrics is to use its theocratical research to solve the methodological issues in the research process, and to discover and reveal the basic laws of information distribution through the study of information process and phenomenon. In this way, makes information management more scientific and provides a quantitative basis for information services and information management decisions. For informetrics, it is necessary to bring quantitative analysis methods to further reveal the structure of information units and the "quantitative change law of literature information”. Further to this, to improve the scientific accuracy of information science from a theoretical point of view. At the same time, to better solve the basic contradictions in the information service, overcome the information crisis, and make the information management work more effective to serve science and technology, economic and social development. Quantitative analysis of bibliographic data was pioneered by Robert K. Merton in an article called Science, Technology, and Society in Seventeenth Century England and originally published by Merton in 1938. === The Significance of Informetrics Research === The significance of informetrics research is to summarize various empirical laws from the theoretical point of view, at the same time test and modify the various empirical laws in the new information unit conditions, and explore its new applicability, therefore, the scientific nature of information science can be improved, but also to provide theoretical guidance for practical work. === The Objects of Informetrics Research === The object of informetrics is broader than the field of bibliometrics and scientometrics, including "messages, data, events, objects, text, and documents”. Informetrics is often used to inform policies and decisions across a broad range of fields, such as economy, politics, technology and social spheres that "influence the flow and use patterns of information". Tague-Sutcliffe describes the following uses of informetrics: Citation analysis; Characteristics of authors; Use of recorded information; Obsolescence of the literature; Concomitant growth of new concepts; Characteristics of publication sources; Definition and measurement o information; Growth of subject literature, databases, libraries; Types and characteristics of retrieval performance measures; Statistical aspects of language, word, and phrase frequencies. == Basic Laws == In the field of informetrics research, there are many outstanding contributors in the discipline with a solid knowledge of quantitative research methods. In the early 20th century, several scientists contributed empirical applications that have become the three basic laws of informetrics, Bradford's law, Lotka's law, and Zipf's law, which promote the development of informetrics. === Bradford's Law === The British documentalist and librarian Samuel C. Bradford first discovered the law of concentration and scattering of literature, and in 1934, it has be
Artificial intelligence industry in Italy
The artificial intelligence industry in Italy is growing and supports industrial development. In 2024 it reached a new record, reaching 1.2 billion euros with a growth of +58% compared to 2023. While in 2025, the growth of artificial intelligence in the industrial application was even greater than in 2024 both in terms of value and application to industrial sectors. == History == The roots of AI research in Italy extend back to the 1970s, when Italian scholars began exploring automated reasoning, programming language semantics, and pattern recognition. Researchers such as those involved in early projects at the National Research Council and various universities laid the groundwork for subsequent academic and industrial developments in the field. During this period, the focus was predominantly on developing algorithms for automated theorem proving and building systems to reason about complex mathematical problems. This era witnessed the birth of methodologies that would later influence numerous AI subfields, from natural language processing (NLP) to robotics. === Institutional milestones and academic contributions === A turning point in the Italian AI landscape was the formation of the Italian Association for Artificial Intelligence (AIxIA) in 1988. Founded by academics, including Luigia Carlucci Aiello, the association established a platform for collaboration between universities, research centers, and industry. Led by Aiello, AIIA played a role in promoting research, organizing national conferences, and fostering international partnerships that connected Italy's AI community to global networks. At the same time, professors such as Roberto Navigli and numerous practitioners contributed to the advancement of AI in Italy. Navigli has worked in multilingual NLP, including the creation of BabelNet, and led the Minerva project. === Industrial AI === Over recent decades, numerous national and European initiatives supported by funding from programs such as the National Recovery and Resilience Plan (PNRR) have spurred the transition from theoretical research to practical applications. Industrial sectors including manufacturing, banking, and healthcare increasingly embraced AI-driven automation, while research institutions collaborated with industrial partners to deploy cutting-edge solutions. In recent years, Italy has also seen the establishment of specialized research centers and institutes aimed at bridging the gap between academic innovation and industrial application. These initiatives indicate a broader national commitment to integrating AI into the fabric of Italian industry. == Recent developments == === Emergence of generative AI === A landmark in Italy's modern AI evolution is the development of Minerva AI. Developed by the Sapienza NLP research group at Sapienza University of Rome and led by Professor Roberto Navigli, Minerva represents the first family of large language models (LLMs) trained from scratch with a primary focus on the Italian language. ==== Minerva 7B ==== The latest iteration, Minerva 7B, has 7 billion parameters and has been trained on an extensive corpus of over 1.5 trillion words. By using advanced instruction tuning techniques, Minerva 7B is able to produce highly accurate, coherent, and contextually sensitive responses addressing common issues such as hallucinations and inappropriate content generation. This breakthrough sets a benchmark for transparent, open-source AI development in the country. Minerva's development, carried out within the FAIR (Future Artificial Intelligence Research) project in collaboration with CINECA and supported by supercomputing resources like the Leonardo (supercomputer), aligns closely with Italy's cultural and linguistic heritage. === Establishment of AI4I === The recent establishment of the Istituto Italiano per l’Intelligenza Artificiale (AI4I) is part of Italy's strategy to improve its industrial competitiveness in AI. This dedicated institute aims to bridge the gap between research institutions and industrial enterprises; promote training and R&D support to nurture the next generation of Italian AI experts; and enhance national competitiveness. This initiative is expected to serve as a hub for applied AI research, driving innovations that are tailored to the specific needs of Italian industry and public administration. === Benefits of InvestAI === Italy's AI industry stands to benefit from the European InvestAI initiative, a plan unveiled at the recent AI Action Summit in Paris. InvestAI is an effort by the European Commission to mobilize €200 billion for AI investments, with a dedicated €20 billion fund earmarked for building AI gigafactories. These gigafactories are planned as large-scale hubs for training advanced, complex AI models using approximately 100,000 last-generation AI chips. For Italy, this investment presents several major opportunities: Access to State-of-the-Art Infrastructure: Italian companies, research institutions, and start-ups can leverage the gigafactories’ immense computational resources, enabling them to train highly sophisticated language models and other AI systems. Enhanced Competitiveness and Collaboration: With InvestAI's layered funding model where EU funds help de-risk private investments Italian firms can access capital more readily. This will bolster public–private partnerships and create a more dynamic AI ecosystem that spans from academic research to industrial applications. Alignment with National and Regional Initiatives: The Istituto Italiano per l’Intelligenza Artificiale (AI4I), based in Turin, is already recognized as a strategic asset by both Italy and the European Union. As the main recipient of InvestAI funds in Italy, AI4I will play a pivotal role in implementing these investments locally, fostering innovation in sectors like manufacturing, healthcare and aerospace. Commission President Ursula von der Leyen emphasized that InvestAI is designed to democratize AI innovation throughout Europe by ensuring that even smaller companies have access to high-performance computing power. For Italy, this means not only keeping pace with global leaders but also harnessing European-scale investments to transform its AI industry and drive economic growth.
List of ARM Cortex-M development tools
This is a list of development tools for 32-bit ARM Cortex-M-based microcontrollers, which consists of Cortex-M0, Cortex-M0+, Cortex-M1, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-M23, Cortex-M33, Cortex-M35P, Cortex-M52, Cortex-M55, and Cortex-M85 cores. == Development toolchains == IDE, compiler, linker, debugger, flashing (in alphabetical order): Ac6 System Workbench for STM32 (based on Eclipse and the GNU GCC toolchain with direct support for all ST-provided evaluation boards, Eval, Discovery and Nucleo, debug with ST-LINK) ARM Development Studio 5 by ARM Ltd. Atmel Studio by Atmel (based on Visual Studio and GNU GCC Toolchain) Code Composer Studio by Texas Instruments CoIDE by CooCox (note - website dead since 2018) Crossware Development Suite for ARM by Crossware CrossWorks for ARM by Rowley Dave by Infineon. For XMC processors only. Includes project wizard, detailed register decoding and a code library still under development. DRT by SOMNIUM Technologies. Based on GCC toolchain and proprietary linker technology. Available as a plugin for Atmel Studio and an Eclipse-based IDE. EmBitz (formerly Em::Blocks) – free, fast (non-eclipse) IDE for ST-LINK (live data updates), OpenOCD, including GNU Tools for ARM and project wizards for ST, Atmel, EnergyMicro etc. Embeetle IDE - free, fast (non-eclipse) IDE. Works both on Linux and Windows. emIDE by emide – free Visual Studio Style IDE including GNU Tools for ARM GNU ARM Eclipse – A family of Eclipse CDT extensions and tools for GNU ARM development GNU Tools (aka GCC) for ARM Embedded Processors by ARM Ltd – free GCC for bare metal IAR Embedded Workbench for ARM by IAR Systems ICC by ImageCraft Keil MDK-ARM by Keil LPCXpresso by NXP (formerly Red Suite by Code Red Technologies) MikroC by mikroe – mikroC MULTI by Green Hills Software, for all Arm 7, 9, Cortex-M, Cortex-R, Cortex-A Ride and RKit for ARM by Raisonance SEGGER Embedded Studio for ARM by Segger. SEGGER Ozone by Segger. STM32CubeIDE by STMicroelectronics - Combines STCubeMX with TrueSTUDIO into a single Eclipse style package Sourcery CodeBench by Mentor Graphics TASKING VX-Toolset by Altium TrueSTUDIO by Atollic Visual Studio by Microsoft as IDE, with GNU Tools as compiler/linker – e.g. supported by VisualGDB VXM Design's Buildroot toolchain for Cortex. It integrates GNU toolchain, Nuttx, filesystem and debugger/flasher in one build. winIDEA/winIDEAOpen by iSYSTEM YAGARTO – free GCC (no longer supported) Code::Blocks (EPS edition) (debug with ST-LINK no GDB and no OpenOCD required) IDE for Arduino ARM boards Arduino – IDE for Atmel SAM3X (Arduino Due) Energia – Arduino IDE for Texas Instruments Tiva and CC3200 Notes: == Debugging tools == JTAG and/or SWD debug interface host adapters (in alphabetical order): Black Magic Probe by 1BitSquared. CMSIS-DAP by Mbed. Crossconnect by Rowley Associates. DSTREAM by ARM Holdings Green Hills Probe and SuperTrace Probe by Green Hills Software. iTAG by iSYSTEM. I-jet by IAR Systems. Jaguar by Crossware. J-Link by Segger Supports JTAG and SWD. Supports ARM7, ARM9, ARM11, Cortex-A, Cortex-M, Cortex-R, Renesas RX, Microchip PIC32. Eclipse plug-in available. Supports GDB, RDI, Ozone debuggers. J-Trace by Segger. Supports JTAG, SWD, and ETM trace on Cortex-M. JTAGjet by Signum. LPC-LINK by Embedded Artists (for NXP) This is only embedded on NXP LPCXpresso development boards. LPC-LINK 2 by NXP. This device can be reconfigured to support 3 different protocols: J-LINK by Segger, CMSIS-DAP by ARM, Redlink by Code Red. Multilink debug probes, Cyclone in-system programming/debugging interfaces, and a GDB Server plug-in for Eclipse-based ARM IDEs by PEmicro. OpenOCD open source GDB server supports a variety of JTAG probes OpenOCD Eclipse plug-in available in GNU ARM Eclipse Plug-ins. AK-OPENJTAG by Artekit (Open JTAG-compatible). AK-LINK by Artekit. PEEDI by RONETIX Debug Probe by Raspberry Pi. RLink by Raisonance. ST-LINK/V2 by STMicroelectronics The ST-LINK/V2 debugger embedded on STM32 Nucleo and Discovery development boards can be converted to SEGGER J-LINK protocol. TRACE32 Debugger and ETM/ITM Trace by Lauterbach. ULINK by Keil. Debugging tools and/or debugging plug-ins (in alphabetical order): Memfault Error Analysis for post mortem debugging Percepio Tracealyzer, RTOS trace visualizer (with Eclipse plugin). Segger SystemView, RTOS trace visualizer. == Real-time operating systems == Commonly referred to as RTOS: == C/C++ software libraries == The following are free C/C++ libraries: ARM Cortex libraries: Cortex Microcontroller Software Interface Standard (CMSIS) libopencm3 (formerly called libopenstm32) libmaple for STM32F1 chips LPCOpen for NXP LPC chips Alternate C standard libraries: Bionic libc, dietlibc, EGLIBC, glibc, klibc, musl, Newlib, uClibc FAT file system libraries: EFSL, FatFs, Petit FatFs Fixed-point math libraries: libfixmath, fixedptc, FPMLib Encryption libraries: Comparison of TLS implementations wolfSSL == Non-C/C++ computer languages and software libraries ==
Operational system
An operational system is a term used in data warehousing to refer to a system that is used to process the day-to-day transactions of an organization. These systems are designed in a manner that processing of day-to-day transactions is performed efficiently and the integrity of the transactional data is preserved. == Synonyms == Sometimes operational systems are referred to as operational databases, transaction processing systems, or online transaction processing systems (OLTP). However, the use of the last two terms as synonyms may be confusing, because operational systems can be batch processing systems as well. Any enterprise must necessarily maintain a lot of data about its operation.